Overhead crane safety: Bridge Crane, Eot and overhead crane travelling crane safety

05 Aug, 2017

Safety on bridge crane, eot crane, and overhead travelling crane, overhead crane,and basic operation, crane operator, and crane Signalers, etc., are for your reference. Check Dongqi crane safety now to ensure your crane safety.

Overhead crane safety on overhead bridge crane, eot crane, and overhead crane travelling crane basic operation, crane operator, and crane Signalers, etc., are for your reference. Check Dongqi crane safety now to ensure your crane safety.Let us image that if you are a rich-experience sometimes will you have the below thoughts?

You've carefully thought out all the angles.
You've done it a thousand times.
It comes naturally to you.
You know what you're doing, it is what you have been trained to do your whole life.
Nothing could possibly go wrong, right?

All these ideas are a hurt at work and in order to have a good working condition today we will explain some basics of eot crane safety.
Hope these can help you and protect yourselves from the dangerous.

Basics of eot Crane Safety

1. Know the rated load of the crane
Overhead bridge crane eot crane safety

Overhead bridge crane eot crane safety

2. Never allow a coworker between a fixed object and a load

Overhead bridge crane eot crane safety

3. Think before you lift

Overhead bridge crane eot crane safety

4. Know your safe working radius

Always ensure that you know the safe travel radius of the eot crane. Contact with electrical sources or other hazards can result in catastrophic consequences.

Overhead bridge crane eot crane safety

5. Dissipate all hazardous energy

Always ensure energy sources are dissipated before initiating any maintenance activity.
Lifting operations are inherently dangerous. Even when proper training is conducted, equipment is properly maintained, employees conduct themselves in a safe manner, and other facets of the safety program are conscientiously attended to, accidents can still occur.
The reason is that eot crane operations are primarily dependant on mechanical devices. These devices can and do fail. When this happens during a lifting event the results can be catastrophic. You are the only controlling influence that can minimize the hazard. Your life literally is in your own hands!

Safe practices for operators:

1. Test all electric hoist controls and brakes at the beginning of each shift.
2. Never attempt to operate an eot crane or hoist that is suspected to be unsafe.
3. Always test brakes by a short lift to ensure control.
4. Move loads only after being signaled by the designated, qualified signaler.
5. Never carry loads over workers.
6. Never carry loads past workers (they must yield right of way).
7. Signalers must keep line-of-sight with the operator.
8. Never allow riders on loads or hooks.
9. Never allow unauthorized persons to operate eot cranes.
10. Always lockout before maintenance or repairing cranes.
11. Frequently inspect cranes exposed to adverse conditions.
12. Always position the hook directly over the load before lifting the load off of the floor.
13. Document and maintain inspection records.
14. Check warning devices and signals before use.
15. Signalers must watch the load.
16. Operators must watch the signalers.
17. Know your travel path in advance of the lift!
18. Know where you're going to set the load down!
19. Will the new location support the weight?

Safe Practices for Signalers

1. Only one person is designated signaler.
2. Maintain line-of-sight with the operator.
3. Ensure the operator acknowledges every signal.
4. Stop the operation if comprehension is lost.
5. Operators must watch the signalers.
6. Plan in advance where the load is going!
7. Know the new location will support the weight.

Leaving or Parking Hoists or Cranes

1. Raise all hooks to - but not through - limit switches.
2. Place all controls in the "off" position.
3. Place main power switch in the "off" position.
4. Make a visual check for any dangerous condition.
5. Report any defects immediately.
6. Tag out defective equipment immediately.
7. Report all cranes that are not in operation immediately.
8. Follow the manufacturer's recommendations.

Keeping safe during the work is not only responsible for yourself but also for your family. No matter how much experience you have, always remember that safe is in the first place.Overhead crane safety on bridge crane, eot crane, and overhead crane travelling crane basic operation, crane operator, and crane Signalers, etc., are for your reference. Check Dongqi crane safety now to ensure your crane safety. If you have any help, please feel free to contact us.

Safety tips for your EOT cranes

Crane safety overview is for you to ensure the safety of your remote control overhead travelling crane, gantry crane, jib crane, workstation crane. Tips on crane safety control, safety devices, operational safety, crane inspection and maintenance, crane accidents and crane risk analysis and preventive measure, and crane factory visiting safety, etc., are for your reference.

Crane safety control and safety devices

Operational safety

Crane inspection and maintenance

Overhead and Gantry Crane Safety and Inspection Requirements
Overhead travelling cranes: Crane Daily Inspection and crane maintenance
Bridge crane inspection and maintenance ensure your bridge crane safety
crane parts scrapped standards: When to replace your crane parts?

Crane accident rish analysis and preventive measures

Crane repair and maintenances

Visiting safety

Crane Factory Visiting Safety Guide - Crane safety for visitors

If have any problem on crane safty, please feel free to contact us. Email: sales@cranesdq.com. WhatsApp/ WeChat: +86 150 3617 7583. Dongqi will assure you the safety of your remote control overhead travelling crane, gantry crane, jib crane, etc.

Dongqi safe eot crane offering

Single girder remote control overhead travelling crane offering

	Electrical hoist single girder remote control overhead travelling crane Electrical hoist single girder remote control overhead travelling crane is widely used in the factory, ware house, stockyard, etc. Electrical hoist single girder remote control overhead travelling crane specifications: Product type: LD single girder remote control overhead travelling crane, Lifting capacity: 1~32t, Span length: 7.5~28.5m, Working class: A3,A4,
	Explosion proof single girder remote control overhead travelling crane Explosion proof single girder remote control overhead travelling crane is designed for hazardous environment, such as, gas, dusty environment to enhance safety. Explosion proof single girder remote control overhead travelling crane specifications: Product type: LB single girder remote control overhead travelling crane, Lifting capacity: 1~20t, Span length: 7.5~28.5m, Working class: A3,
	Low headroom single girder remote control overhead travelling crane Low headroom single girder remote control overhead travelling cranes are designed for low height plant and factory, where the lifting room is limited but lifting height is high. Low headroom single girder remote control overhead travelling crane specifications: Product type: LDP single girder remote control overhead travelling crane, Lifting capacity: 1~32t, Span length: 7.5~22.5m, Working class: A3, A4,
	FEM electrical hoist single girder remote control overhead travelling crane FEM hoist single girder remote control overhead travelling crane is designed with features of Sturdy quality,Good price, One year quality assurance, Full set of after sales service. European hoist single girder remote control overhead travelling crane specification: Product type: HD single girder remote control overhead travelling crane,european crane Lifting capacity: 1~30t, Span length: ≥6m, ,Working class: A5,
	European underslung single girder remote control overhead travelling crane European underslung single girder underslung crane is installed on the roof of the workplace without bracket, saving space and lowering cost. Underslung single girder remote control overhead travelling crane specifications: Product type: NLX single girder remote control overhead travelling crane, Lifting capacity: 1~20t, Span length: ≥ 6m, Working class: A5,
	Suspension single girder remote control overhead travelling crane Suspension single girder remote control overhead travelling crane is a small light lifting equipment, economical price, which is widely used in the factory, warehouse, stockyard, etc. Suspensions single girder remote control overhead travelling crane specifications: Product type: LX single girder remote control overhead travelling crane, Lifting capacity: 1~10t, Span length: 3~15m, Working class: A3,

Double girder remote control overhead travelling crane

	European double girder remote control overhead travelling crane FEM double girder remote control overhead travelling crane meets all the European crane standards with CE cerfiticates. Fem double girder remote control overhead travelling crane specifications:Crane Capacity of 5~ 80 ton,Span length:10.5~35.5m, Working class:A4~A7,
	Electric Hoist double girder remote control overhead travelling crane Electric hoist double gider remote control overhead travelling crane is widely used in machinery fabrication, metallurgical plant auxiliary workshop, storage, stock ground, and power station, textile industry and food industry. Double girder remote control overhead travelling crane specifications:Capacity:5~63 ton,Span Length:8m~32m,Working Class:A3~A5,
	Hook Double Girder Overhead Orane General use hook remote control overhead travelling crane is widely used to upload and move of normal weight in the fixed crossing space and also can work with various special-purpose hoist in special operations. Hook double girder remote control overhead travelling crane specifications:Capacity:5-550 ton, Span length:10.5~35.5m, Working class:A4~A7,
	Explosion Proof double girder remote control overhead travelling crane Explosion proof remote control overhead travelling crane is designed for explosive gas atmospheres with explosion-proof electrical equipment. EX-proof double girder remote control overhead travelling crane specifications:Capacity:5~75 ton, Span Length:10.5~31.5m,Working Class:A4, A5,
	Electromagnetic double girder remote control overhead travelling crane The electromagnetic remote control overhead travelling crane is used in metallurgy factory or outdoor place to load and transport electromagnetic black metal materials, such as , steel ingot, merchant steel and pig iron, etc. Electromangetic double girder remote control overhead travelling crane specifications:Capacity:5~32 ton,Span Length:10.5~31.5m,Working Class:A5, A6,
	Double Trolleys double girder remote control overhead travelling crane The double trolley remote control overhead travelling crane is used to lift long and big loads. Double girder remote control overhead travelling crane specifications:Capacity:(2.5+2.5)~(200+200) ton, Span length:10.5~35.5m,
	Insulation double girder remote control overhead travelling crane The insulation remote control overhead travelling crane is used to handle electrolyse non-ferrous metals such as magnesium, aluminum. Insulation double girder remote control overhead travelling crane specifications:Capacity:5~50 ton,Span Length:10.5~31.5m,Working Class:A6,Ambient Temperature:-25~50℃,
	grab bucket double girder remote control overhead travelling crane Grab remote control overhead travelling crane is widely used in power station, storage, workshop, and port to load and unload scattered objects. Grab bucket double girder remote control overhead travelling crane specifications:Capacity:5~25 ton ,Span Length:10.5~34.5m,Working Class:A6,
	Ladle double girder remote control overhead travelling crane Ladle remote control overhead travelling crane are widely used in the smelting industry to convey, pour and charge the liquid hot metal in the process of smelting. Double girder remote control overhead travelling crane specifications:Capacity:5~74 ton,Span Length:10.5~31.5m,Working Class:A7,Ambient Temperature:-10~60℃,

Make your remote control overhead travelling crane safer

Parameters of remote control overhead travelling crane drawing
Overhead crane: S= Crane Span, H= Lifting height

In order to give you suitable remote control overhead travelling crane safety solution promptly, please help our remote control overhead travelling crane engineer to confirm the following information as much as possible:

Types of remote control overhead travelling crane: (Single or double girder? European type or Common one? )
Capacity:
Span:
Height of Lift:
Power supply: (3phase? Voltage? Hz?)
Bay/ Travelling Length:
Quantity:
Operation: Through Pendant/Radio Remote/Cabin Control
Indoor/Outdoor:
Application (What are you planning to lift) :
Environment (Normal/ hazardous) :
Building drawing if possible:
Location:
Industry type: (Eg: Auto, steel, sugar, stone, etc)
Rail Existing/New: (Size in case of Existing)
Number of Cranes in bay:
Existing Structure/New Structure:
Your full company address and contact details:

If you do not know about how to solve your remote control overhead travelling crane problems, please feel free to leave us a message or email to sales@cranesdq.com. WhatsApp/ WeChat: +86 150 3617 7583. The reply of our remote control overhead travelling crane engineer will be given within 24 hours. Get your custom remote control overhead travelling crane solutions.

Previous: End trucks, Crane end trucks, and end truck crane

Next: FEM eot crane for textile industry Bangladesh