Safety Operation Control Points of European Standard Crane

What are the key points for safe operation of European standard double beam cranes?

1. Before the operation of the European standard double girder crane, it is necessary to check the wire rope, brake, transmission pulley, etc. At the same time, it is necessary to ensure that the wire rope remains at least 3 turns in the drum.
2. When the European overhead crane is operating, it is not allowed to cross the hoist wire rope, and the wire rope cannot drag the ground.
3. When using the European standard crane, the operator should not leave the post and operate the equipment indiscriminately.
4. If there is a sudden power failure during the use of the equipment, it is necessary to open the switch in time to cut off the power, and at the same time, put down the transported objects.
5. When using the European double girder crane to lift goods, the speed must be uniform, and there must be no sudden braking and change of direction.
6. When panning, it is necessary to ensure that the goods are higher than 0.5 meters above the obstacle, and the object should be kept at a low speed and light. Put and avoid dumping.
7. All personnel are not allowed to stay or walk under the boom of the European standard double-beam crane and the lifting objects, and the objects must maintain a certain safe distance from the overhead power lines.

If have interests in our FEM overhead crane, welcome to contact us for inquiries.