Home > Media & Resource > Blog

Overhead crane C Hook, Crane hook, C hook, Lifting hooks

20 Feb, 2017

Overhead lifting crane c Hook as a type of lifting hooks for the overhead cranes. The crane c hooks has many types, such as, counter balanced c-hooks, motorized rotating C hook, Mill duty C hook, paper roll c hook, coil handling c hooks, etc. Get the c hook or c hook overhead crane now.

Dongqi C hook for sale

Dongqi C hook for sale 

Overhead crane C hook

If you work with coils and you need to handle them, C-Hooks are a great option. Our hook lifters are a safe, efficient and quick way of handling coils. Discover Dongqi’s crane c hooks, and find out how they will help you in handling your coils the best possible way.
Dongqi knows how important is to use the best product for your requirements. That is why our coil lifters and lifters hook and all of our all Types of cranes are designed and manufactured according to our customer's needs. This way, you will be using the overhead crane accessories that better suit your application and crane projects.

C hook overhead crane

C hook overhead crane

Features of Crane C Hook

Lifting safety is what we cares most.

The C-Hooks of Dongqi Hoist and Crane are designed to meet customer’s specific coil handling requirements. This hook lifting products are manufactured according to the FEM Standards. Our overhead crane and crane C hook can ensure you the operation safety and we can offer you CE certificates for your lifting equipment.

Types of Crane C HooK offering

Crane C hooks are widely used with overhead cranes for material handling, coiling handing, paper roll handling, and other types of loads handling. Dongqi Hoist and Crane is able to provide you customized C hook for your overhead crane for the custom loads handling.

Counter Balanced C-hooks

crane installation

Counter Balanced C-hooks

This crane C-hook has a lower member length ("L" dimension) which equals the maximum coil width. The full length support feature of this C-hook increases the amount of surface area in contact with the coil, minimizing the potential for damage to the inner wraps of lighter gauge coil stock.
crane installation

Motorized Rotating C Hook

The motorized rotating crane C-hook, a mill duty lifter, comes equipped with a motorized rotator capable of continuous 360° rotation. This feature provides additional capability for safe and precise positioning of coils.

Mill Duty C-hook.The mill duty C-hooks are designed for continuous, severe mill service. Larger sections and corner radii keep stresses to a minimum to provide maximum service life.

Close Stacking C-hook for Narrow Aisles

Close Stacking C-hook for Narrow Aisles

This C-hook is designed for close stacking. The distance from pick-up point (center of gravity) to the end of the C hook is shortened. The shorter lifting arm permits handling all coil widths within operating range (widest to narrowest) without the lifting arm extending beyond the outer edge of the coil. The reduced overall width of this style of C hook lifter can help decrease aisle space requirements, increasing storage capacity.

 

Paper roll crane c hook

Paper Roll C hook

This C-hook lifts the paper roll by inserting the lower member through the roll core.

crane installation


C-hooks for Narrow Coils

The type of C-hook I has the lifting bail is turned 90° and burned from the same piece of plate as the hook, making it an integral part of the C-hook. 
Spring balanced  C hook

Spring balanced C-hook


• Eliminates counter weight and minimizes C-hook weight
• Coil edge protection available
• Particularly useful for handling large coils

 Crane C hook options

Minimum Capacity 3.2 tons and Maximum Capacity 32 tons. Half-round plate attached to leg,protecting coil and expanding C-hook service life. Each C-hook is custom engineered to meet the customer’s specific requirements for load configuration, weight, lifting area and headroom. Dongqi Hoist and Crane offers the C hooks with the following options:

  • Bail pins
  • Digital weighing systems
  • Designs for narrow coils
  • High temperature
  • Motorized rotation
  • Protective pads
  • Mill duty lifters
  • Remote control features
  • Storage stands
     

Baisic of crane c hook, main structure, daily maintenance, how to control self-balance, introduction of safety inspection

 The Crane c hook is a type of crane spreader, mainly used for the horizontal lifting of the coil. Because its shape resembles the surface C, it is called a Crane c hook. It is widely used in hot strip mills and cold strip mills of steel plants, and is also suitable for the lifting of various types of rolls at stations, freight yards, terminals, and large steel coil users.

The main structure

Crane c hook is mainly composed of hanging concrete and weighted iron.

  • 1. Hanging concrete: The main part of the Crane c hook is made of steel plate (high-quality low-alloy steel) and steel pipe. The cross-section is a box-type structure, which has good resistance to bending and torsion. The spreader has light weight and long service life.
  • 2. Counterweight iron: plays a role in adjusting the balance of the spreader so that the center of gravity of the spreader and the lifted object is in one line.

How is the Crane c hook self-balancing?

  • First, the length of the C-shaped hook and the opening of the hook opening should be determined according to the size (length and maximum diameter and bore diameter) of the suspended coil. And determine the location of the hook hanging point.
  • The C-hook is subjected to the upward pulling force of the hook and the force acting on the weight of the coil and the weight of the spreader downward. The force of the coil acts on the center of the coil. The self-gravity of the spreader acts on the center of gravity of the spreader.
  • The weight must also be considered. The counterweight is a C-hook that can reach equilibrium when unloaded.
  • The section at both corners is affected by the shear force and bending moment. When calculating, the self-weight may not be considered. The safety factor shall be 6/7 times. According to the calculation of the cantilever beam, the bending stress of the section at the corner is calculated according to the material mechanics formula. The ratio of the allowable bending stress of the material to the calculated bending stress is the complete coefficient. When calculating the stiffness, it is necessary to calculate the deflection (deformation amount) of the hook end and also calculate it by the cantilever beam.
  • The allowable deformation can be calculated by dividing the length of the cantilever beam by 350. The vertical section of the spreader is mainly subjected to tension. According to the tension calculation, the tensile stress is equal to the gravity of the coil divided by the cross-sectional area. Dividing the yield stress by the tensile stress just before is the safety factor. Take 6-7. 
  • The plate thickness should not be less than 10mm. According to the weight of the coil, the structural section should be determined. If the weight is small, the I-shaped section can be used, and the reinforcement can be added. The weight can be increased by using the box section and the reinforcing bar.
  • The corner radius is 200. Above, to increase the strength, the calculation of the hook head also mainly considers the tensile stress and the size of the hook.

Selection of standard and type of coil spreader

When selecting standards for coil hook spreaders, it is necessary to include the coefficients of the application methods that are affected by the scale, component, shape of the lifted load, and the hoisting method to be used, etc., in the accounting thinking, and the request for the limit work force given together. It is necessary to think about the clean environment and the variety of loads. It is necessary to select the slings of the proper length that satisfy both the ability to meet the application methods. If multiple slings are used together to lift the load, it is necessary to use the same type of slings; the raw material for the flat slings cannot be subjected to To the environment or load impact.
Routine maintenance
After using, the Crane c hook must be placed on a dedicated shelf, stored in a ventilated, dry, clean factory building and kept by a dedicated person.
The surface of Crane c hook should be protected against rust, and it must not be stored in acids, alkalis, salts, chemical gases and humid environments.
The Crane c hooks must not be stored in high temperature areas.
Periodically clean the rotating parts and regularly apply lubricating oil to prevent dry friction and seizure.

Crane c hook safety inspection

  • 1. Human-driven lifting mechanism, experiment with 1.5 times the rated load as inspection load
  • 2. Power-driven lifting mechanism, experiment with 2 times rated load as inspection load
  • 3. After the hook is removed from the inspection load, there shall be no obvious defects or deformations, and the increase in the opening degree shall not exceed 0.25% of the original size.
  • 4. The qualified hook should be printed in the low stress area of the hook, including the rated weight, factory or factory name, inspection mark, production number, etc.

When you meet the situation as below it should be scrapped:

  • 1.Crack
  • 2. Dangerous section wear up to 10% of original size
  • 3. Opening degree increased by 15% from the original size
  • 4. The hook twisting deformation exceeds 10°
  • 5.C-hook dangerous section or hook neck plastic deformation
  • 6. The hook thread is corroded

Get your C hooks

In order to send you the specific price of C hook, could you please leave us the following information including:

  • 1, What are the loads:____(eg: Steel pipe)
  • 2, Dead weight of loads:____  T?
  • 3, Length of the loads:____  M
  • 4, Internal diameter:____  MM
  • 5, Outside diameter:____  MM

Any need or inquiry, please feel free to contact us by leaving a message below or email to sales@cranesdq.com.

Top