For ideal workshop crane, Pakistan NO.1 Steel factory visit workshop crane company

For ideal workshop crane, Pakistan NO.1 Steel factory visit workshop crane company.

Workshop cranes are widely used in various industries for more efficient material handling, especially in steel Industry. As a professional workshop crane company, Dongqi crane has being served many steel manufacturing factories with customized workshop cranes to improve their material handling efficiency and improve the productivity. As a well-known workshop crane company, Dongqi Crane will accept the visit of customers around world. Today, Dongqi Crane would like to invite you visit our crane company and factory with PSM, the first and largest Pakistan steel factory.

PSM ， NO. 1 steel factory in Pakistan

Pakistan Peoples Steel Mills Ltd (PSM) is the first and largest steel factory of Pakistan which is a Certified ISO 9001:2008 & ISO 17025 company. The steel plant has the capability to produce steels according to all major international quality standards. PSML's Quality Assurance & Development Division also offers third party inspection including material testing services, NDT services (UT, MT, PT, RT & TOFD) and failure analysis to a wide spectrum of customers in the field of petro-chemicals, fertilizer, steel, & railways etc. In addition to these Peoples Steel has expertise in the field of Industrial Project & Services - Plant Fabrication, Erection & Commissioning. PSML's Industrial Projects & Services Division is engaged in Fabrication, Plant Erection, Inspection and Turnkey projects since last decade.

Dognqi crane company overview

In order to seek future cooperation, Dongqi Crane invites PSM engineers to visit our factory. Visit and see with your own eyes to get the ideal workshop cranes for your own steel factory.

Dongqi crane factory overview

Dongqi crane Factory is located in Dongqi Industry Park in Changyuan, Henan, the “Cradleland of Cranes”. It takes up 240,000 square meters and has 3600 employees including 500 technicians and over 70 senior engineers working and living there. Dongqi crane factory owns all kinds of manufacturing and detection devices up to 2000 sets. In order to give MPS a vivid understanding of Dongqi factory, we conduct the tour step by step.

crane parts warehouse visiting

Crane parts workshop is the first stop. The crane company in origin was a state-owned crane spare parts company, which has been the crane parts supplier to well-known crane companies around world, such as DEMAG china, etc. So far, Dongqi Crane also suppling the crane parts to crane companies, and users around world.
Crane parts supplying is one of Dongqi Crane’s strength for better crane services. We begin the checking from crane parts warehouse, bearing (SKF brand, Switzerland), Hook, Wheel, Winding Drum, etc., stock and production lines.

Crane parts stock of Dongqi Crane

From the pictures, you can see clearly of the bearing, hook, wheel etc. Here i am pleasant to tell you that as a crane manufacturer, we can handle the whole production lines from crane parts to the whole set crane. So this is the greatest advantage for us to support you do the crane maintenance.

Crane girder production warehouse visiting

Crane girder as the one of the main part of overhead crane workshop is the second stop of our crane company visiting.

Crane girder welding 

Crane girder workshop

During this process, Mr.Atif asked us about the welding joint testing:

“ How shall you test whether the weld joint satisfied the technical?”
“We test the weld joint by third party(Chinese government required) ,and the test tool is ultrasonic flaw detection detector”, answered by Dongqi’s crane engineer.

Crane trolley production warehouse visiting

Crane trolley is the powerful lifting mechanism of the crane. Dongqi crane trolley is one of the hottest crane parts.

Crane trolley production warehouse

During this process, Mr.Atif asked the separately motor, reducer, brake and winding drum etc.
He also mentioned the motor & brake shall be out of the winding drum, this will be good for the maintenance

european crane girder production warehouse visiting

fem crane is the crane designed based on European standards. Dongqi FEM crane is very competitive in material handling market for its good quality and affordable price.

European warehouse

European crane girder production is also the interest of Mr. Atif. During this process, Mr.Atif also climbed the ladder about 15m to the platform of cranes used in Dognqi’s warehouse, our standard platform are one side of FEM crane and without platform of trolley, according to PSM specifications, Mr.Atif asked us again the double girder cranes shall have two sides platform, one sides for the maintenance and one sides for the cable, the platform for trolley is also used for the maintenance. And we confirmed it is ok, no problem. Dongqi crane is experienced at providing customized workshop cranes.

(The red line is the bar bar,below Mr.Shad mentioned parts)

During this process, Mr.Shad the electrical engineer talked about the bus bar, as the pictures shows, our warehouse cranes installed the single core bus bar, but according to PSM requirement, Mr.Shad asked us again that PSM wanted the 4 wire bus bar.
Besides, Mr.Shad said, PSM may installed 1 more set 30tons crane in the future, so we have to consider the bigger ratting to consider 3 sets cranes.
We confirmed it is ok.

Electrical parts warehouse visiting

ABM motor(Germany make)

And then we take PSM engineer to check the ABM motor, Mr.Atif and Mr.Shad asked the below questions:

1) There is Chinese in the nameplate? 
We explain, All the imported parts get into China market, the suppliers must print the Chinese.
2) How shall we prove the motor is come from Germany?
We explain, we can offer the contract that we make order with Germany ABM.

Electric control box（Buying certificate from ABM）

Then we visited the electrics warehouse, Mr.Atif mentioned all the electrics, contractor, etc., must be France Schneider, and we confirmed yes.

(Cabient control, we produce by ourselves and easy to operated)

And we take PSM to check the cabin, and Mr.Shad confirmed again PSM not just want the cabinet control, they want three controllers, operator cabin with joystick controllers and pendant & Radio remote control.

Dongqi Crane customer factory visiting

For further understanding of Dongqi workshop crane, Dongqi Crane bring PSM representatives to visit one of Dongqi crane customers to observe the performances of Dongqi workshop crane in customer’s workshop after the brief Summaries of the technical. The Chinese customer of Dongqi crane is China great wall machinery co.,ltd, which has Installed 2 sets of Dongqi Crane, the 30/10t-22.5m double girder overhead crane and the10t-22.5m partial hang overhead crane.

Overhead crane in the workshop of China great wall machinery co.,ltd

During this process, they checked both cranes traveling performance. Both workshop cranes are traveling well because they are also the inverter controller.

Dongqi crane factory front door

The next day morning, both Mr.Atif and Mr.Shad confirmed the former technical specification one by one and asked us the meaning of their requirement, we talked one by one and then confirmed them.

And then we took them to Kaifeng city to visit the Millennium City Park, and then send them to Zhengzhou airport before 17:00

Dongqi has accepted the visits of countless customers around world. If you are interested in Dongqi workshop cranes, such as overhead crane, gantry crane, jib crane, electric hoist and other lifting equipment, please feel free to contact us. Dongqi crane welcomes customers to visit us. Dongqi Crane can arrange everything for you if necessary. Visit Dongqi Crane, see with your own eyes, and buy your ideal workshop crane!