Crane production questions and answers on Types of cranes. As a crane manufacturer, Dongqi Crane production is under the supervision of quality crane to ensure the quality of your overhead crane, gantry crane, jib crane, hoist crane and workstation crane, etc. Check the crane production questions to get your pleasant answers now.
Yep, of course, we are a crane manufacturer, and we have our own crane engineer group. They can work out customized crane design according to your requirement. The most important thing is that you tell us all the needed information and parameters for customized your crane requirements.
According to your practical crane usage and workshop’s application situation, Please check the following questions or contact with Dongqi crane salesman they will recommend the suitable one crane for you.
Overhead crane : No occupation of ground area; widely used indoor, also can be used outdoor; Suitable if the workspace is limited or the working ground is occupied with many equipment or goods; Need to install stand column, support bracket, runway beam and rails.
Gantry crane: Occupy ground area; More suitable if there is no stand column; widely used outdoor, also can be used indoor. Need install foundation and pave rails on ground.
Jib crane: Can be used out door and indoor;Need install foundation on ground; Occupy small ground area covering little working area; Have up down, left right work direction and 360 degree rotation.
Overhead Crane | Gantry Crane | Jib Crane |
---|---|---|
|
|
|
The most economic crane design is gantry crane, but if there are many equipments and goods on ground, we suggest to use overhead crane to save the working space.
Yep, at once the ground’s concrete width is more than 20cm, then there is no need to dig the ground. Just need pave belt steel plate, and fix it on the concrete floor with bolts. Then weld the rails is okay.
Under 20℃, the crane’s steel plate will reply by Q345. When temperature is too high, will use H grade motor, and increase the cable’s insulation grade, also will increase the crane’s ventilation.
Different connection of main beam and end beam can reduce the height;
Different crane design can shorten crane’s self height.
For eletric hoists, there is automatic painting line. For large cranes, two times base paint, and two times final paint, use epoxy polyamide paint.
Yep, as a hoist and crane manufacturer, we offer all the related hoist and crane spare parts, such as motor, hoists, drums, wheels, grabs, hooks, rails, travel beams, enclosed bus bar etc.
Every department will work together to serve you, please see the following cooperation picture.Please check detailed information of Dongqi crane production process.
By pendent button/By remote control/By cabin.
Yep, we can offer clamshell grab, orange grab, electromagnet, C hooks, belt or other hangers.
Safety Measures | Foundation |
---|---|
Loss of pressure fault phase protection |
|
Over Voltage, over current protection |
|
Overload Limit Switch |
|
Weight limit |
|
Fire limit |
|
Crane Travel Limit Switch |
|
Our cranes are mainly consisted of metal structure( which is assembled with main beams, side beams, platform, ladder, railings, and trolley frame, etc), machining parts, purchased parts ( such as, bearings, fasteners, standard parts, etc.),cooperation parts ( such as, the hook) and electrical spare parts, etc.
Process crane production: cutting and welding
Process crane production: welding main beam
Process crane manufactuering:semi finished main beam
Process crane production: main beam painting;
Process crane production: 20 ton overhead crane fabrication
Process crane production: 50 ton gantry crane fabrication
Process crane : jib crane
Blog